Skip to main content

devil ONE M: Frequently asked questions

c68b2f a554ee
Updated

 

Contents

How do I connect the devil ONE M to my network?

  1. Make sure that your smartphone or tablet is logged into the home Wi-Fi. Have your access data for your Wi-Fi/home network (SSID/name and password of your Wi-Fi) ready.
  2. If necessary, download the devil RAUMFELD APP from the Play Store/App Store.
  3. After starting the app, the setup wizard will guide you through the setup.
  4. Further instructions for setting up your devil streaming system can be found here.

Return to top

How do I establish a Bluetooth connection to the devil ONE M?

1st connection:

  • Activate the Bluetooth function in the settings of your playback device (e.g. smartphone or tablet).
  • Briefly press the pairing button (Bluetooth on the back of the device) on your devil speaker. Alternatively, you can tap the corresponding speaker in the Raumfeld app under Menu > Settings > Rooms and devices and then start pairing mode.
  • Set your device to search for new Bluetooth® devices.
  • Then select the devil ONE M in the device list of your player and establish a connection.

If your player (e.g. smartphone) was previously connected to the devil ONE M:

  • Activate the Bluetooth function in the settings of your player (e.g. smartphone).
  • Select your devil ONE M from the list of saved devices and establish a connection.

Return to top

Can I use the devil ONE M in damp rooms or outdoors?

The device does not have IP certification and is not suitable for permanent use in damp rooms (bathroom etc.) or outdoors (balcony, terrace, garden etc.). We advise against permanent installation/use in outdoor areas/humid rooms.

Return to top

Where can I find information on firmware/updates?

New firmware for devil Raumfeld devices is displayed in the devil Raumfeld app (Menu → Settings → Devices → Updates).

Updates for the devil Raumfeld app (iOS and Android) are displayed via the respective app stores.

Further information can be found here: General information: Software/Firmware/Drivers/Updates/Apps

Return to top

How do I reset the devil ONE M (Reset)

Note: Resetting the device also resets all system configurations. You must therefore set up the device again afterwards

Reset the device: With the device switched on, press the reset button (12)
with a bent paper clip and hold it down until the device restarts (for at least 8 seconds).

If you want to repair or reinstall the firmware, the following instructions will help you:

Return to top

Comments

0 comments

Article is closed for comments.

Powered by Zendesk