c68b2f a554ee
- Total activity 1582
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1052
Articles
Recent activity by c68b2f a554ee-
devil Streaming Subwoofer: There are various switches and controls on the back. What can I set with them?
The devil Streaming/Raumfeld subwoofer offers the following settings on its rear panel: Slide switch "Phase": here the signal output of the subwoofer is optimized. Try changing the phase setting if...
-
I use a version 6.0 Android device and am trying to set up my Wi-Fi streaming system. The setup assistant, however, does not continue after the initial screen. How can I proceed?
Make sure that your smart device is signed in to your home WiFi – the same WiFi network you plan to use with your WiFi streaming system. If you are already signed in to your WiFi network, deactivat...
-
Is it possible to reinstall the firmware of a Raumfeld device ("flashing")?
Should one of your Raumeld devices no longer react even after you've disconnected the power and restarted the device, you may reinstall the device's firmware and thereby reset it to factory default...
-
What is the use of the on/off automatic switch ("Auto On/Off") of the active subwoofer?
The On/Off switch is a power-saving standby switch. The switch must be set to "On" or "1" to activate the standby. The subwoofer is activated as soon as it receives a strong bass signal. After ap...
-
Connector: I use the optical output. However, the volume can now no longer be controlled via the app.
If the signal is output via the optical output on the connector, the volume cannot be controlled via the app.Instead, use the analogue output of the device or control the volume on the connected am...
-
I want my Raumfeld speakers to use less energy when no stream is playing. Does Raumeld offer an automatic standby mode?
It’s possible to activate a standby mode with all Raumfeld speakers starting with generation 2. To activate this mode, go to the room settings in the app, then select the speaker you would like to ...
-
Early Raumfeld devices: no Ecomode available
Early Raumfeld devices (all with Raumfeld logo and external WIFI antenna) do not support the ECO mode introduced with the successor generation (devices with Raumfeld logo but without external anten...
-
I connected the sounddeck / Soundbar to my television via HDMI cable. The device is recognised yet no sound - or only partial sound - is produced. What can I do?
Please check to see whether your television supports the HDMI-ARC standard and whether the product is connected to your TV from this output. Alternately, you can use a digital optical cable to conn...
-
I have a set of working stereo speakers in storage. Can I use them again – out on the terrace, for instance – without an extra amplifier?
Yes. devil's REARSTATION makes it possible to enjoy your music sources anywhere without needing an additional receiver or amplifier. The wireless transmitter/receiver system has a built-in 2 x 30 w...
-
Optimal dipole placement
Dipoles should be best mounted to the side of the listening location at a height of 1.40 to 2.10 meters. Many devil dipoles already have an integrated wall mount. The dipoles then produce sound tow...