c68b2f a554ee

Here is more detailed information from the AUDIOVISION trade magazine (Issue 4/03) on the subject of impedance settings of the AV Receiver:Actually, it should be quite simple: Connect the speaker c...

Contents Does devil Speakers offer its own speaker cables? What distinguishes speaker cables from other cables? What influence does the speaker cable have on sound quality? What impedance is recomm...

The fact that some amplifier manufacturers make corresponding specifications is due to the VDE standard. In order to meet this standard, the devices must not become hotter than 40° C above room tem...

If you want to compare the power ratings of speakers and power amplifiers, you have to make sure that you're not comparing apples and oranges. Some manufacturers deliberately exploit widespread ign...

In order to be able to realise devil's usually very low sales prices, it is not possible to offer the speakers in quite a few housing designs. This circumstance would drive up production and storag...

These are usually cubic wooden cabinets (same MDF material as speaker cabinets), which are equipped with a bass reflex port, have no diaphragm and are tuned to a specific frequency (e.g. 40 Hz as i...

The impedance describes the electrical resistance of the speaker. This resistance depends on the frequency of the reproduced music signal. Since frequencies between approx. 20 and 20,000 Hz are tra...

The resistance of the speaker cable is yielded from the specific resistance of the conductive material (the copper wire strands) as well as the cable length. As a speaker is connected to the amplif...

Opinions differ as to the answer to the question of what constitutes good sound. With a calibration system, however, you can come very close to an objective answer. Such systems evaluate the sound ...

Since active subwoofers in a home theatre system are connected to the subwoofer out output (and not the speaker outputs) of the AV receiver, a different connection cable is required than for the sa...