REARSTATION - Wireless transmission system for rear speakers in the home theater
Key facts
- Enables wireless sound transmission to 2 passive speakers
- Suitable for avoiding troublesome or difficult cable running
- Set includes 1 x 2-channel transmitter and 2 x receivers (left or right channel)
- only one REARSTATION set can be used per wireless range (approx. 20m)
- maximum wireless range : 20 meters (can be reduced by objects, walls or other transmitters (Wi-Fi, DECT))
Setup/connection
- Connect the REARSTATION (transmitter) to your home theater/AV receiver instead of the rear speakers to the PreOut connection using an RCA cable. See also REARSTATION: Connecting to an AV Receiver
- The RearStation Compact (receivers) should be positioned in the back of the room (e.g. on the wall or shelf).
- Connect the speakers. Prepare the speaker cables accordingly and press on the speaker connection terminal (1) and insert the end of the cable into the corresponding opening. The cable is clamped when the connection terminal is released.
- Plug the RearStation Compact into a power socket for operation. You can plug it directly into the wall or use a power strip.
- Switch channel if necessary
The left stereo channel is preset on the RearStation Compact. If necessary, you can change the stereo channel as follows:- Quickly press the L/R button (4). The status display (3) flashes three times in the color of the set channel:
Yellow - left stereo channel
Magenta - right stereo channel
- Quickly press the L/R button (4). The status display (3) flashes three times in the color of the set channel:
- Establish the connection between RearStation Compact and RearStation.
- Pairing is fully automatic.
- If no transmitter is found after 5 minutes, the RearStation Compact goes into standby mode. If this happens or the first connection fails, please proceed as follows:
- Plug both RearStation Compact into the socket. The status display (3) will blink white slowly.
- Put the REARSTATION (transmitter) into pairing mode by switching it on.
- As soon as the RearStation Compact has found a compatible transmitter, it will connect to it. The status indicator (3) lights up white permanently.
Comments
0 comments
Article is closed for comments.