When trying to set up, the message "Router incompatible" appears. What could be the reason for this?

The message "Router incompatible" appears if a prerequisite in the configuration of the WIFI for the operation of Raumfeld is not given.
Possible causes are:

1. DHCP is not switched on in the router and it, therefore, does not assign an IP address
2. In the router, the Mac filter is switched on and the Raumfeld device cannot be integrated into the network
3. The router blocks internal traffic (client isolation) and connected devices are therefore not allowed to communicate directly

. Solution: Make sure that your WIFI router allows points 1-3.