Skip to main content

BOOMSTER GO: Frequently asked questions

c68b2f a554ee
Updated

Contents

How can I check the battery status of the BOOMSTER GO?

The BOOMSTER GO has an LED status display for the battery level. The battery status is displayed by briefly pressing the ON/OFF button

Status display Charging status
All three LEDs light up Full (66% to 100%)
Two LEDs light up Sufficient (33% - 65%)
one LED lights up Low (11% - 32%)
1 LED flashes slowly (1/sec) incl. warning tone Very low, please charge (below 10%)

Note: On some smartphones, the battery level is also shown on the display.

Can the BOOMSTER GO be attached or hung on things?

An adjustable wrist strap (3) is included with the BOOMSTER GO, which can also be used to hang the device. There is a 1/4-inch threaded socket (14) on the back of the BOOMSTER GO, which you can use to mount the device on a commercially available tripod (e.g. tripods). The mounts of some action cameras (1/4" GoPro-compatible thread) can also be used with it.

 

mceclip0.png

Note: The product has been optimized for horizontal playback.

Can a BOOMSTER GO be used as a hands-free device?

The BOOMSTER GO can be paired with devices such as smartphones, tablets or PCs via Bluetooth and used as a hands-free device via the integrated microphone. When an incoming call is received, your smartphone rings and the BOOMSTER GO will play the ringtone. Any media playback that may be running is paused.

  • If you want to reject the call, briefly press the minus button "- " (10). The call is ended and the caller hears the busy signal.
  • To accept the call, briefly press the play button ">" (11) . You can now make the call with the BOOMSTER GO using the built-in microphone.

    mceclip0.png

Note: The telephone system is also available in TWS mode (when 2 BOOMSTER GOs play synchronously)

Can two BOOMSTER GO be paired for True Wireless Stereo mode?
 

True Wireless Stereo is a feature that separates a stereo signal into left/right channels and transmits it wirelessly to two players. The feature is available for BOOMSTER GO. The range is approximately 10 meters.

Setting up True Wireless Stereo (TWS) with two BOOMSTER GO:

  1. Pair the first BOOMSTER GO with your smartphone
  2. after successful pairing, start the TWS pairing on the first BOOMSTER GO: Press and hold the "Bluetooth" (8) and "Plus" (12) buttons together for approx. 3 seconds. The Bluetooth® LED (9) flashes blue and you hear a sound.
  3. Also start pairing on the second BOOMSTER GO by pressing and holding the "Bluetooth" button (8) for 2 seconds. After a short time, the two devices will connect. You will hear a sound and the Bluetooth® LED (9) on both BOOMSTER GOs will now light up blue continuously.
  4. connect to the first BOOMSTER GO from your smartphone by selecting from the list in the Bluetooth settings on your smartphone
    mceclip0.png
    Note: Switching off one of the two BOOMSTER GOs ends TWS operation.

Can the BOOMSTER GO play music while charging?

Yes, this is possible. Playback on the BOOMSTER GO is not interrupted during the charging process.

Comments

0 comments

Article is closed for comments.

Powered by Zendesk