ROCKSTER AIR 2: Frequently asked questions

Note: All information relating to ROCKSTER AIR 2 below also applies to Fender X devil ROCKSTER AIR 2 .

Where can I find the user manual?
What accessories are available for the ROCKSTER AIR 2?
How do I establish a Bluetooth® connection?
How can I clear the Bluetooth® list?
How do I pair several devices with each other?
Can I connect devices such as a microphone & guitar?
Sound output is very quiet or completely inaudible
The ROCKSTER AIR 2 won't start. What could be the cause?
What do I do if the ROCKSTER AIR 2 no longer responds?

Where can I find the user manual?

You can find the user manual here.

What accessories are available for the ROCKSTER AIR 2?

We currently offer the following accessories for the ROCKSTER AIR 2:

How do I establish a Bluetooth® connection?

Pairing connects your audio source/player with the ROCKSTER AIR 2.

First switch on the ROCKSTER AIR 2.
Switch on the Bluetooth® function on your external player (e.g. smartphone).
Press and hold the Bluetooth® button (9) on the ROCKSTER AIR 2 for 2 seconds.
You will hear a signal tone and the LED in the button (9) will flash blue.
Let your player/smartphone search for new Bluetooth® devices.
"ROCKSTER AIR 2" should appear in the list of devices found after the search.
Select "ROCKSTER AIR 2" from the list of devices found.
A signal tone sounds and the LED in the button (9) lights up blue continuously.
Pairing is complete. The Bluetooth® device is connected to the ROCKSTER AIR 2 and you can use the speaker as an output device.
Adjust the volume using the master volume control (13) and the input volume control (20).

How can I clear the Bluetooth® list?

Press and hold the Bluetooth® button (9) for 8 seconds. As soon as you hear a signal tone, the Bluetooth® list is cleared.

How do I pair several devices with each other?

The ROCKSTER AIR 2 can either be connected wirelessly to another ROCKSTER AIR 2 or wired to up to 10 other speakers. You can find out how this works in the article Pairing the ROCKSTER AIR 2 with other devil devices
Please note that when connecting two ROCKSTER AIR 2s wirelessly, Bluetooth devices such as smartphones can be used.
More than two devices can only be connected via XLR cables.

Can I connect devices such as a microphone & guitar?

The ROCKSTER AIR 2 has an instrument input (6.3 mm) and an analog XLR combo input (6.3 mm and XLR). This allows you to connect a guitar and a microphone at the same time, for example. Details can be found in the operating instructions on p. 17-19.

You can only connect your microphone via cable - Bluetooth is unfortunately not supported.

Sound output is very quiet or completely inaudible

The volume may be set too low. Try increasing the volume on the master volume control and the input volume control of the ROCKSTER AIR 2.
The output volume on the external player may be too low. Increase the volume on the external player (e.g. smartphone) as a test.
The ROCKSTER AIR 2 is not connected to the player. Check the connection or connect an external player via Bluetooth or Aux.
The ROCKSTER AIR 2 is not set as an output device on the player. Check the audio output settings on the external player.
The Bluetooth connection may be affected by interference from another wireless system. Test a different location.
For players with Android operating system: The volume limiter on the player may be active. Deactivate this on the Android device.

The ROCKSTER AIR 2 won't start. What could be the cause?

The battery may not (yet) be sufficiently charged. Connect the device to electric power and fully charge the battery.
The power button was pressed too briefly when trying to switch on. Press and hold the power button for 2 seconds until an LED animation runs and a tone sequence sounds and the device starts.

What do I do if the ROCKSTER AIR 2 no longer responds?

Check whether the ROCKSTER AIR 2 is waiting for an input or whether the player is paused.
Disconnect the Bluetooth® connection if necessary.
Disconnect the power supply and restart the speaker.
If this does not help and the speaker still does not respond, perform a hardware reset. To do this, press the power button (8) and the play/pause button (10) at the same time and hold them down for 5 seconds.

Contents